KYMCO XCITING 500 Service Manual page 196

10
. DRIVE AND DRIVEN PULLEY
＊
Install the drive belt with the arrow mark
facing up and towards to clockwise.
Install the drive belt and clutch/driven pulley
assembly.
Hold the clutch outer with the special tool as
shown.
Special tool:
Universal holder
Install the collar and nut.
Tighten the nut to the specified torque.
Torque: 80 N•m (8 kgf•m, 58 lbf•ft)
Install the drive pulley face and washer.
Apply oil to the drive pulley face nut threads
and seating surface and install the nut.
Hold the drive face with the special tool and
tighten the bolt to the specified torque.
Special tool:
Universal holder
Torque: 135 N•m (13.5 kgf•m, 97 lbf•ft)
Drive Belt
Nut/Collar
E017
Universal Holder
Washer/Nut
E017
XCITING 500
Clutch/Driven Pulley Assembly
Clutch Outer
Drive Pulley Face
Universal Holder
10-20