Engine Idle Speed - KYMCO XCITING 500 Service Manual

3
. INSPECTION/ADJUSTMENT
Apply clean engine oil to the new oil filter
cartridge threads, flange surface and a new O-
ring.
Install the new oil filter cartridge and tighten
it to the specified torque.
Tool:
Oil filter cartridge wrench
Torque: 10N•m (1 kgf•m, 7 lbf•ft)
Refill the engine oil (page 3-13)

ENGINE IDLE SPEED

Inspect and adjust the idle speed after all
other engine maintenance items have been
performed and are within specification.
The engine must be warm for accurate idle
speed inspection and adjustment.
Warm up the engine.
Place the scooter on its center stand.
Unlock the seat with the ignition key.
Open the seat and remove carburetor cover.
Turn the throttle stop screw as required to
obtain the specified idle speed.
Idle speed: 1400±100 rpm
O-ring
E052
XCITING 500
O-ring
Throttle Stop Screw
3-14