KYMCO XCITING 500 Service Manual page 104

5
. FUEL SYSTEM/FUEL PUMP
/FUEL TANK/CARBURETOR
Connect the positive (+) terminal of a 12 V
battery to the terminal of the carburetor
heater and the battery negative (-) terminal
to the terminal.
Check that the heater section is heated in 5
minutes after the battery has been connected.
REASSEMBLY
Carburetor reassembly can be performed in
the reverse order of disassembly. When
reassembling, carefully observe the
following instructions.
＊
● Assemble the parts taking
consideration of their function.
● Replace O-rings and seals with new
ones.
Fit a new O-ring in to the float chamber
groove securely.
XCITING 500
Carburetor Heater
O-ring
5-14