KYMCO XCITING 500 Service Manual page 163

8. CYLINDER HEAD/VALVES
Install the common camshaft holder by arrow
mark facing outside.
Install and tighten the holder bolts (No. 10 –
13) in a crisscross pattern in four steps to the
specified torque as follow diagram.
(10)
12 (1.2, 9)
Step 1
23 (2.3, 17)
Step 2
"Arrow" Mark
Tighten the two cylinder bolts to the specified
torque.
Torque: 10 N•m (1 kgf•m, 7 lbf•ft)
8-21
Tighten the bolts to the specified torque in sequence
N•m (kgf•m, lbf•ft)
(11) (12) (13)
← ← ←
← ← ←
＊
Apply engine oil to cylinder head bolt
(No. 10 – 13) threads.
Cylinder Bolts
XCITING 500