KYMCO XCITING 500 Service Manual page 326

19
. ELECTRIC STARTER XCITING 500
Starter Motor Cable
STARTER MOTOR
INSPECTION
Remove the luggage box (page 2-3).
Disconnect the starter motor cable from the
starter relay switch.
Turn the ignition switch to "ON".
Connect the starter motor cable directly to the
battery positive terminal.
If the starter motor does not turn, the starter
motor is faulty.
Nut
REMOVAL
Remove the carburetor (page 5-5).
Turn the ignition switch turned to "OFF"
Release the rubber cap and remove the terminal
nut to disconnect the starter motor cable from
the starter motor.
Rubber Cap
Starter Motor
Remove the two bolts and starter motor.
Bolts
19-5