Fuel Tank - KYMCO XCITING 500 Service Manual

5. FUEL SYSTEM /FUEL PUMP
/FUEL TANK/CARBURETOR
REMOVAL
Remove the floorboard (page 2-6)
Disconnect the fuel hoses.
Disconnect the fuel pump connector.
Remove the fuel pump and filter.
INSTALLATION
Installation is in the reverse order of
removal.
＊
● Install the fuel pump with the arrow
mark facing up.
● Connect the fuel inlet hose between the
inlet duct of the fuel pump and fuel
filter.
● Connect the fuel outlet hose between
the outlet duct of the fuel pump and
carburetor.

FUEL TANK

REMOVAL
Remove the floorboard (page 2-6 ).
Remove the inner cover (page 2-14).
Remove the front lower cover (page 2-15).
Remove the fuel pump and fuel filter (page
5-17).
Remove the front heat insulation cover.
5-17
Fuel Pump Connector Fuel Hoses
"Arrow" Mark
Outlet Duct
Heat Insulation Cover
XCITING 500
Inlet Duct