KYMCO XCITING 500 Service Manual page 295

16
. BRAKE SYSTEM
Remove the caliper bracket from the caliper
body.
＊
Do not remove the caliper and bracket
pins unless replacement.
ASSEMBLY
Apply silicone grease to the boots inside.
Install the caliper bracket to the caliper.
Install the pad spring into the caliper body as
shown.
INSTALLATION
Install the front caliper onto the fork leg.
Install and tighten the new front caliper
mount bolts to the specified torque.
Torque: 32 N•m (3.2 kgf•m, 23 lbf•ft)
16-25
Boots
Bolts
Pad Spring
Bolts
XCITING 500
Bracket
Brake Hose
Brake Hose
Bolts
Brake Caliper