7. ENGINE REMOVAL/INSTALLATION
ENGINE HANGER
REMOVAL
Loosen and remove the engine mount nut
(page 7-7).
Loosen and remove the engine mount bolt
(page 7-7).
Remove the engine hanger mount bolts and
outer collars.
Remove the engine hanger and inner collars.
Remove the nut, washers, rubber washers and
engine hanger rod.
INSTALLATION
Installation is in the reverse order of removal.
Torque:
Engine hanger mounting bolt:
50 N•m (5 kgf•m, 36 lbf•ft)
Engine hanger rod nut:
35 N•m (3.5 kgf•m, 25 lbf•ft)
7-11
Bolts/Outer Collars
Inner Collars
Nut
Washers
Rubber Washers
Engine Hanger rod
XCITING 500