KYMCO XCITING 500 Service Manual page 162

8. CYLINDER HEAD/VALVES
Install intake and exhaust camshaft holders to
the correct locations.
＊
Install each camshaft holders to the
correct locations.
"IN": no stop pin.
"EX": has a stop pin.
Apply engine oil to cylinder head bolt (No.
1 – 9) threads.
Install and tighten the holder bolts (No. 1 – 9)
in a crisscross pattern in four steps to the
specified torque as follow diagram.
(1)
18 (1.8, 13)
Step 1
48 (4.8, 35)
Step 2
Tighten the bolts to the specified torque in sequence
N•m (kgf•m, lbf•ft)
(2) (3) (4)
← ← ←
← ← ←
Stop Pin Exhaust Camshaft Holder
(5) (6)
12 (1.2, 9)
←
23 (2.3, 17)
←
XCITING 500
(7) (8) (9)
← ← ←
← ← ←
8-20