Folding (Outputting Bi-Folded/Tri-Folded Paper); Preset Repeat Image (Making Multiple Copies On A Single Sheet) - Fuji Xerox ApeosPort-IV C5575 User Manual

Folding (Outputting Bi-Folded/Tri-Folded Paper)

This feature allows you to fold copies in half, or crease in half.
Important • When the Finisher-B1 or the Finisher-C1 is installed, do not remove output copies from the finisher
Note
1
Select [Folding].
2
Select any option.
Off
Does not fold copies.
Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) or the
Finisher-C1 with Booklet Maker (optional) is installed.
When the the Booklet Maker Unit for Finisher-B1 (optional) is installed:
Creases copies in half.
When the Finisher-C1 with Booklet Maker (optional) is installed:
Folds copies in half.

Preset Repeat Image (Making Multiple Copies on a Single Sheet)

This feature allows you to repeatedly copy one original onto equally divided areas according
to the specified number of copies.
tray until all the output copies have been delivered.
• The supported paper orientation is only
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
. Select the tray whose orientation is set to
Output Format
.
3
147