Mfp Stapler Assembly Sensor (Finisher Media Bin Present) Removal - Lexmark X651de Service Manual

7462

MFP stapler assembly sensor (finisher media bin present) removal

1. Remove the LED sensor cover. See
page 4-200.
2. Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
A
3. Remove the harness connected to the media bin present sensor.
4. Remove the sensor (finisher bin media present).
Service Manual
4-202
"MFP stapler assembly LED sensor cover removal" on
Previous
Next
Go Back