Adjusting Magnification Of The Scanner In The Auxiliary Scanning Direction - Kyocera Mita KM-1505 Service Manual

(7) Adjusting magnification of the scanner in the auxiliary scanning direction

Perform the following adjustment if the magnification in the auxiliary scanning direction is not correct.
U065
U053
(main scanning
(P. 1-4-9)
direction) (P. 1-6-22)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "065" using the copy exposure
adjustment keys or zoom +/- keys.
Select "Exp. 3" (auxiliary scanning
direction) using the copy exposure
Press the size select key and the
machine enters the test copy mode.
Place an original and press
the start key to make a test copy.
Press the stop/reset key to
U065
(auxiliary scanning
direction)
Start
Press the start key.
adjustment keys.
Is the image correct?
Yes
exit maintenance mode.
End
Original
example 1
Figure 1-6-40
Press the start key.
The new setting
For copy example 1, increase the
value using the zoom (+) key.
No
For copy example 2, decrease the
value using the zoom (–) key.
Setting range: –25 – +25
Initial setting: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image longer, and decreasing it
make the image shorter.
Copy
Copy
example 2
is stored.
2BT
1-6-23