Kyocera Mita KM-1505 Service Manual page 36

Maintenance
item No.
U005 Copying without paper
Description
Simulates the copy operation without paper feed.
Purpose
To check the overall operation of the machine.
Method
1. Press the start key. A selection item appears.
2. Select the item to be operated using the copy exposure adjustment keys.
Display
P
3. Press the interrupt key.
4. Set the operation conditions required. Changes in the following settings can be made.
• Paper feed locations
• Magnifications
• Copy density
• Keys on the operation panel other than the energy saver (preheat) key
5. To control the paper feed pulley, remove all the paper in the drawers, or the drawers. With the paper
present, the paper feed pulley does not operate.
6. Press the start key. The operation starts.
Copy operation is simulated without paper under the set conditions. When operation is complete, the
selected item appears.
7. To stop continuous operation, press the stop/reset key.
Completion
Press the stop/reset key at the screen for selecting an item. The indication for selecting a maintenance item No.
appears.
U020 Initializing all data
Description
Initializes all the backup RAM on the main PCB to return to the original settings.
Purpose
Used when replacing the main PCB.
Method
1. Press the start key.
2. Select "on" using the zoom +/– keys.
Display
– – –
on
3. Press the start key. All data in the backup RAM is initialized, and the original settings for inch specifications
are set.
When initialization is complete, the machine automatically returns to the same status as when the main
switch is turned on.
Completion
To exit this maintenance item without executing initialization, press the stop/reset key. The indication for
selecting a maintenance item No. appears.
Description
Operation
Only the copier operates.
Operation
Canceling initialization
Executing initialization
2BT
1-4-5