Kyocera Mita KM-1505 Service Manual page 96

2BT
5. Remove the paper feed shaft unit from the
lower front side of the machine.
6. Remove the screw holding each of the paper
feed pulleys and then the pulleys.
7. Replace the paper feed pulleys and refit all
the removed parts.
• Before returning the drawer, turn the main
switch on.
• When refitting the paper feed clutch, the
stopper of the paper feed clutch must be
firmly into the groove of the machine.
1-6-4
Paper feed shaft unit
Figure 1-6-4
Paper feed pulleys
Figure 1-6-5