Paper Feed Section - Kyocera Mita KM-1505 Service Manual

2-1-1 Paper feed section

The paper feed section consists of the primary feed and secondary feed subsections. Primary feed conveys paper from
the drawer or bypass tray to the left and right registration rollers, at which point secondary feed takes place and the
paper travels to the transfer section in sync with the printing timing.
The drawer can hold up to 250 sheets of paper. The bypass tray can hold up to 50 sheets of paper.
Paper is fed from the drawer by the rotation of the paper feed pulley. Paper is fed from the bypass tray by the rotation of
the bypass paper feed pulley.
1 Paper feed pulley
2 Bypass paper feed pulley
3 Right registration roller
4 Left registration roller
5 Drawer bottom plate
9
3
4
8
2
6
0
Figure 2-1-1 Paper feed section
RCL
RSW
PFCL
BYPPFCL
Figure 2-1-2 Paper feed section block diagram
7
5
1
6 Bypass lift
7 Paper feed clutch (PFCL)
8 Bypass paper feed clutch (BYPPFCL)
9 Regisuration clutch (RCL)
0 Registration switch (RSW)
RCL
CN6-6
RSW
CN3-13
MPCB
PFCL
CN6-4
BYPPFCL
CN6-1
2BT
2-1-1