Kyocera Mita KM-1505 Service Manual page 83

(3) Image is too
light.
Causes
1. Insufficient toner.
2. Deteriorated developer.
3. Dirty or deteriorated drum.
(4) Background is visible.
Causes
1. Deteriorated developer.
(5) A white line appears
longitudinally.
Causes
1. Dirty or flawed main charger wire.
2. Foreign matter in the developing section.
3. Flawed drum.
4. Dirty shading plate.
Causes
1. Insufficient toner.
2. Deteriorated developer.
3. Dirty or deteriorated drum.
If the add toner indicator lights, replace the container.
Check the number of copies made with the current developer. If it
has reached the specified limit, replace the developer.
Clean the drum or, if the maintenance level has been reached,
replace the drum (see page 1-6-29).
Causes
1. Deteriorated developer.
Check the number of copies made with the current developer. If it
has reached the specified limit, replace the developer.
Causes
1. Dirty or flawed main charger wire.
2. Foreign matter in the developing section.
3. Flawed drum.
4. Dirty shading plate.
Clean the main charger wire or, if it is flawed, replace the main
charger unit.
Check if the magnetic brush is formed uniformly. If not, replace the
developer.
Replace the drum (see page 1-6-29).
Clean the shading plate.
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
2BT
1-5-13