Optical Section; Detaching And Refitting The Exposure Lamp - Kyocera Mita KM-1505 Service Manual

2BT

1-6-3 Optical section

(1) Detaching and refitting the exposure lamp

Replace the exposure lamp as follows.
Procedure
1. Remove the printer cover and right cover and
then the contact glass.
2. Move the mirror 1 frame to the cutouts of the
machine.
3. Detach the exposure lamp connector from the
inverter PCB.
Inverter PCB
1-6-12
Contact glass
Connector
Figure 1-6-18
Right cover
Figure 1-6-17
Cutout
Mirror 1 frame