Kyocera Mita KM-1505 Service Manual page 37

2BT
Maintenance
item No.
U021 Initializing memories
Description
Initializes the setting data other than that for adjustments due to variations between respective machines, i.e.,
settings for counters, service call history and mode settings. As a result, initializes the backup RAM according
to the specifications depending on the destination selected in U252.
Purpose
Used to return the machine settings to the factory settings.
Method
1. Press the start key.
2. Select "on" using the zoom +/– keys.
Display
– – –
on
3. Press the start key. All data other than that for adjustments due to variations between machines is
initialized based on the destination setting. When initialization is complete, the machine automatically
returns to the same status as when the main switch is turned on.
Completion
Press the stop/reset key. The indication for selecting a maintenance item No. appears.
U022 Initializing backup data
Description
Initializes only the data set for the engine or scanner section.
Purpose
To be executed after replacing the scanner unit.
Method
1. Press the start key. A selection item appears.
2. Select the item to be initialized using the copy exposure adjustment keys.
Display
A
b
3. Press the start key.
4. Select "on" using the zoom +/– keys.
Display
– – –
on
5. Press the start key. The data for the engine or scanner section (U060 to 099, U403, U404 and U990) is
initialized.
Completion
Press the stop/reset key. The indication for selecting a maintenance item No. appears.
1-4-6
Description
Operation
Canceling initialization
Executing initialization
Operation
Engine
Scanner
Operation
Canceling initialization
Executing initialization