Kyocera Mita KM-1505 Service Manual page 26

2BT
Load paper.
13. Pull the drawer out as far as it will go.
14. Press the drawer bottom plate down and lock it
there.
15. Holding the width adjustment lever, move it to
align the width guide with the required paper
width.
16. While squeezing the presses on the sides,
remove the length guide and then insert it into the
holes of the required paper length.
Store the length guide in the space shown in the
diagram when the paper touches the right-hand
wall of the drawer.
1-3-8
Drawer bottom plate
Figure 1-3-14
Width adjustment
Width guide
Figure 1-3-15
Length guide
Figure 1-3-16
lever