Kyocera Mita KM-1505 Service Manual page 27

17. Set the paper flush against the left-hand wall of
the drawer.
* Load paper so that it is kept under the claw of
the drawer.
* When loading paper into the drawer, make sure
that the copy side is facing upward (the copy
side is the side facing upward when the
package is opened.)
* Check that the length and width guides securely
contact the paper. If there is a gap, adjust the
position of the length or width guide to close it.
* Load paper all at once and do not add paper
until all sheets are used up. Adding paper to a
drawer that still contains paper may cause
paper jams.
18. Push the drawer back in gently.
* Check that the paper is kept under the claw of
the drawer. If not, reload the paper.
Make test copies.
19. Set the original and make test copies.
Completion of machine installation.
Claw
Figure 1-3-17
2BT
1-3-9