Kyocera Mita KM-1505 Service Manual page 137

2BT
Start key
PVSYNC
DM
PFCL
RSW
RCL
a: When the drive motor (DM) turns on, the paper feed clutch (PFCL) turns on for 150 ms to start primary paper feed.
b: 160 ms after the leading edge of the paper turns the registration switch (RSW) on, the registration clutch (RCL) turns
on for 300 ms.
c: When the PVSYNC signal from the optical section turns on, the registration clutch (RCL) turns on to start secondary
paper feed.
d: 150 ms after the trailing edge of the paper turns the registration switch (RSW) off, the registration clutch (RCL) turns
off.
Start key
PVSYNC
DM
BYPPFCL
RSW
RCL
a: When the drive motor (DM) turns on, the bypass paper feed clutch (BYPPFCL) turns on for 150 ms to start primary
paper feed.
b: 160 ms after the leading edge of the paper turns the registration switch (RSW) on, the registration clutch (RCL) turns
on for 300 ms.
c: When the PVSYNC signal from the optical section turns on, the registration clutch (RCL) turns on to start secondary
paper feed.
d: 150 ms after the trailing edge of the paper turns the registration switch (RSW) off, the registration clutch (RCL) turns
off.
2-1-2
a
150 ms
b
160 ms
300 ms
Timing chart 2-1-1 Paper feed from the drawer
a
150 ms
b
160 ms
300 ms
Timing chart 2-1-2 Paper feed from the bypass tray
c
150 ms
c
150 ms
d
d