Kyocera Mita KM-1505 Service Manual page 131

4. Move the fixing pressure release lever to the
the release position (in the direction of 1).
5. While holding the fixing pressure release
levers outward, push the fixing pressure
release levers further.
6. Remove each of two bearings and fixing
pressure release levers and then remove the
press roller.
7. Replace the press roller and refit all the
removed parts.
Fixing pressure
release lever
Figure 1-6-66
Bearing
Fixing pressure release lever
Figure 1-6-67
Fixing pressure
release lever
Press roller
Bearing
Fixing pressure
release lever
2BT
1-6-39