Kyocera Mita KM-1505 Service Manual page 47

2BT
Maintenance
item No.
U093 Setting
(cont.) 1. Select the item to be adjusted by lighting a copy exposure indicator using the copy exposure adjustment
keys.
2. Adjust the setting using the zoom +/– keys.
Copy exposure
Description
indicator
Exp. 1 Change in density when manual density is set dark 0 to 3
Exp. 3 Change in density when manual density is set light 0 to 3
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. Press the stop/reset key. The selected item appears.
Test copy mode
While this maintenance item is being performed, copying from an original can be made in test copy mode.
Completion
Press the stop/reset key while a selection item is displayed. The indication for selecting a maintenance item
No. appears.
1-4-16
Description
Image density
Dark
Set to LIGHTER
Light
Light Center
Density adjustment range: Normal
Density adjustment range: Special area
Figure 1-4-3 Exposure density gradient
Setting range
Setting: 3 Setting: 0
Set to DARKER
Density adjustment
Dark
Initial setting
0
0