Kyocera Mita KM-1505 Service Manual page 22

2BT
Adjust the fixing pressure.
3. Lift the fixing section release levers and close the
paper conveying cover.
Remove the tapes, pads and sheet inside
the drawer.
4. Pull the drawer out and remove the tapes and
two pads.
Caution: Be sure to load paper after the main
switch is turned on and copying is
enabled. Loading paper before turning
the main switch on may cause paper
jams.
5. Open the original cover and remove the sheet on
the contact glass.
1-3-4
Fixing section
release levers
Figure 1-3-4
Pads
Figure 1-3-5
Sheet
Figure 1-3-6
Tapes