2BT
(8) Adjusting the scanner leading edge registration
Perform the following adjustment if there is regular error between the leading edges of the copy image and original.
U034
U066
(P. 1-6-8)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "066" using the copy exposure
adjustment keys or zoom +/- keys.
Press the start key.
Press the size select key and the
machine enters the test copy mode.
Place an original and press
the start key to make a test copy.
Is the scanner
leading edge registration
correct?
Press the stop/reset key to
exit maintenance mode.
1-6-24
Start
For copy example 1, increase
the value using the zoom (+) key.
No
For copy example 2, decrease
the value using the zoom (–) key.
Setting range : –15 – +15
Yes
Initial setting: 0
Changing the value by 1 moves
the leading edge by 0.17 mm.
End
Original
Copy
example 1
Figure 1-6-41
Press the start key.
The new setting
is stored.
Copy
example 2