Kyocera Mita KM-1505 Service Manual page 39

2BT
Maintenance
item No.
U033 Checking main switch operation
Description
Turns the main switch on by energizing the main switch off solenoid.
Purpose
To check the operation of the main switch off solenoid in auto shutoff mode.
Method
1. Press the start key. "A" appears.
2. Press the start key. The main switch is turned on.
Completion
Press the stop/reset key. The indication for selecting a maintenance item No. appears.
U034 Adjusting the print start timing
Adjustment
See pages 1-6-8 and 9.
U042 Setting the LSU type
Description
Sets the type of the LSU installed in the copier.
Purpose
Used when replacing the LSU.
Method
1. Press the start key. A selection item appears.
2. Select the LSU type using the zoom +/– keys.
Display
A
b
C
Initial setting: b
3. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/reset key. The indication for
selecting a maintenance item No. appears.
U051 Adjusting the amount of slack in the paper
Adjustment
See page 1-6-11.
1-4-8
Description
Description
Type A
Type b
Type C