Kyocera Mita KM-1505 Service Manual page 56

Maintenance
item No.
U170 Setting the drum cleaning mode
Description
Sets whether or not to apply toner to the drum and perform drum cleaning every paper interval.
Purpose
Set to "on" if an image problem occur such as black dots.
Method
Press the start key.
Setting
1. Select either "on" or "oFF" using the zoom +/– keys.
Display
on
oFF
Initial setting: off
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
To exit this maintenance item without changing the current setting, press the stop/reset key. The indication for
selecting a maintenance item No. appears.
U196 Turning the fixing heater on
Description
Turns the fixing heater on.
Purpose
To check fixing heater.
Method
1. Press the start key. "on" appears.
2. Press the start key. The fixing heater turns on for 1 s and then turns off.
Completion
Press the stop/reset key when fixing heater is off. The indication for selecting a maintenance item No. appears.
U199 Checking the fixing temperature
Description
Displays the fixing temperature and the ambient temperature.
Purpose
To check the fixing temperature and the ambient temperature.
Method
1. Press the start key.
2. Display each temperature by lighting the respective copy exposure indicator using the copy exposure
adjustment keys.
Copy exposure indicator
Exp. 1
Exp. 3
Completion
Press the stop/reset key. The indication for selecting a maintenance item No. appears.
U200 Turning all LEDs on
Description
Turns all the LEDs on the operation panel on.
Purpose
To check if all the LEDs on the operation panel light.
Method
Press the start key. All the LEDs on the operation panel light.
Press the stop/reset key or wait for 10 s. The LEDs turns off, and the indication for selecting a maintenance
item No. appears.
Description
Description
Drum cleaning mode on
Drum cleaning mode off
Description
Fixing temperature (°C)
Ambient temperature (°C)
2BT
1-4-25