Installation Of The Side Cover - Barco HDF Use And Installation Manual

first hook in the side of the front cover at the front filter,
then gently push the other side of the front cover into position,
ensure that the locking studs in the corners click into their receivers.
Image 16-9
Front cover installation
Secure the front cover by locking the captive screw in the middle at the bottom of the front cover.
Image 16-10
Front cover, dust ring
Reinstall the rubber dust ring around the lens holder.

16.6 Installation of the side cover

W
ARNING
Necessary tools
7 mm flat screw driver.
How to install the side cover
Check if the bottom and top filters are present.
Check the pressure indicated on the internal manometer of the liquid cooling circuit. This pressure should be between 0,5 and 1
bar. If the pressure is out of range, inform the responsible and qualified technician, so he may take necessary corrective action.
R5905158 HDF SERIES 16/06/2015
:
This procedure may only be performed by qualified technical service personnel.
16. Removal and installation of the projector covers
279