Hd In Function Of The Lens Throw Ratio (Tr) - Barco HDF Use And Installation Manual

Hide thumbs Also See for HDF:
Table of Contents

Advertisement

RA
TH
SH
(A) SIDE VIEW
Image 1-1
A
Side view.
B
Top view.
RA Restricted Access location (booth area of projector).
PR Projector.
TH
Theater.
RZ
Restriction Zone in the theater.
SH Separation Height. Must be minimum 2 meter.
SW Separation Width. Must be minimum 1 meter.
Based on national requirements, no person is allowed to enter the projected beam within the zone between the projection lens and
the related hazard distance (HD). This shall be physically impossible by creating sufficient separation height or by placing barriers.
The minimum separation height takes into account the surface upon which persons are assumed to stand.
On image 1-1 a typical setup is displayed. It must be verified by the installer if these minimum requirements are met. If required a
restricted zone (RZ) in the theater must be established. This can be done by using physical barrier, like a red rope as illustrated in
image 1-2.
Image 1-2
1.4

HD in function of the lens Throw Ratio (TR)

TR (Throw Ratio)
The ratio of the distance to the screen (throw) to the screen width.
R5905158 HDF SERIES 16/06/2015
RZ
SH
TH
SW
RA
PR
SW
(B) TOP VIEW
1. Safety
SW
RZ
SW
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdf w26Hdf w22Hdf w30 flexHdf series

Table of Contents