Barco HDF Use And Installation Manual page 31

B
Image 3-18
Lens installation, preparation
Ensure that the lens holder stands in the On-Axis position (horizontal and vertical mid position).
Note: The lens holder is placed default in the On-Axis position at factory.
Gently insert the lens in such a way that the lens connector matches the socket (B).
Image 3-19
Lens insertion
Insert the lens until the connector seats into the socket.
Warning: Do not release the Lens yet, as the Lens may fall out of the Lens Holder.
Secure the lens in the lens holder by sliding the lens lock handle into the "locked" position, which is away from the lens power supply
socket. Ensure the lens touches the front plate of the lens holder.
Image 3-20
Lock lens
Check if the lens is really secured by trying to pull the lens out of the lens holder.
R5905158 HDF SERIES 16/06/2015
A
3. Physical installation
27