Barco HDF Use And Installation Manual page 252

13. Projector Control
Image 13-131
Main menu, projector control
Image 13-133
GSM configuration
Select Pin code and press ENTER.
A PIN code input field appears.
Image 13-135
Device configuration, PIN code
Enter the 4 digit PIN code corresponding with the mounted SIM card. Use the digit keys on the remote control or the local keypad.
Each digit is replaced by an asterisks.
Press ENTER when the 4 digits are entered.
Image 13-136
PIN code entered
Select OK and press ENTER to configure the software.
Replacing a SIM card with a new one
Before removing the current mounted SIM card, select Projector Control → GSM configuration → GSM pincode
248
Image 13-132
Projector control, GSM configuration
Image 13-134
GSM pincode
R5905158 HDF SERIES 16/06/2015