13. Projector Control
Image 13-79
Front XLR Output voltage enable
Press ENTER to toggle between [On] and [Off].
[On] : Front XLR Output voltage enabled.
[Off] : Front XLR Output voltage disabled.
Output voltage level setup
Press Menu to activate the menus and select Projector Control → DMX → Output voltage level.
Image 13-80
Main menu, projector control
Image 13-82
Front XLR output voltage level
Press ENTER to toggle between [0 Volt], [9 Volt], [12 Volt] and [24 Volt].
232
Image 13-81
Projector control, DMX
R5905158 HDF SERIES 16/06/2015