Barco HDF Use And Installation Manual page 148

10. Layout
Image 10-59
Main menu, layout
Press ENTER to select.
The Lens behavior window opens.
Image 10-61
Lens behavior setting
Press ENTER to toggle lens behavior between [Yes] or [No].
[Yes] = each layout will use the same zoom/focus/shift settings. The zoom/focus/shift settings of the previous selected layout will
be applied to the next selected layouts.
[No] = each layout will use its own zoom/focus/shift settings. Lens should be calibrated, when using this setting.
If [No] is selected, the calibrate lens menu opens.
Image 10-62
Lens calibration
Before different zoom/focus/shift setting can be used, the lens should be calibrated. When a lens change has taken place, always
calibrate the lens before using this setting.
If you have to calibrate the lens, select Yes and press ENTER to start the calibration.
During the calibration, a message is displayed. This message disappears when the calibration is finished.
Image 10-63
Lens calibration message
144
Image 10-60
Layout, Lens behavior
R5905158 HDF SERIES 16/06/2015