Barco HDF Use And Installation Manual page 42

3. Physical installation
Image 3-42
Opening clamps
Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby the
rigging clamps mounted on the projector.
Image 3-43
Lowering and mounting truss bar
Lift up the projector and hook the four rigging clamps over the support bars of the truss.
Lock all four rigging clamps.
Install a safety chain (S) around both sides of the carrying handle and around the truss.
Image 3-44
Mounting Safety chains
Warning: Install the safety chain in that way that the projector cannot drop more than 20 cm.
Lift up the truss with attached projector to the desired height.
38
S
S
R5905158 HDF SERIES 16/06/2015