Individual Projector Address - Barco HDF Use And Installation Manual

13. Projector Control

13.2 Individual Projector Address

About individual projector address
Before a projector, and only this projector, can be controlled via a remote control, an individual address must be entered in the
projector.
This individual projector address can then be used to control the projector via remote control or via a serial connection.
Next to an individual projector address, each projector has also a common address for group control.
How to set the address
Press Menu to activate the menus and select Projector Control → Projector Address → Projector Address.
Image 13-1
Main menu, projector control
Image 13-3
Projector address
Press ENTER to activate the address input.
208
Menu position
Local LCD
Change Language
Scheduler
GSM configuration
Image 13-2
Projector control, projector address
Standby button
Menu position
Bar scale position
Back light
Time out
Add task
Edit task
Delete task
Scheduler on/off
PIN code
SMS subscription
R5905158 HDF SERIES 16/06/2015