Rcu Rugged Case Installation - Barco HDF Use And Installation Manual

3. Physical installation
Image 3-2
Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery compartment.
Image 3-3
Insert (1) the lower tab of the battery cover in the gap at the bottom of the remote control, and press (2) the cover until it clicks in
place.
2
Image 3-4
C
AUTION
battery is replaced with an incorrect type.
C
AUTION
installed.
3.1.2

RCU rugged case installation

How to install the rugged case of the remote control ?
Slide the bottom of the RCU into the rugged case and then pull the top of the rugged case over the top of the RCU as illustrated.
22
1
1
:
Replace with the correct battery type. Use two AA size batteries. There is a risk of explosion if the
:
Replace the battery as explained above. There is a risk of explosion if the battery is incorrectly
2
R5905158 HDF SERIES 16/06/2015