Barco HDF Use And Installation Manual page 90

8. Input
Image 8-46
EDID, create
Use the ▲ or ▼ key to select Create.
Press ENTER to open the creation menu.
Fill out the Timings section.
Use the ▲ or ▼ key to select a setting.
Use the ◄ or ► key to change the value
or press ENTER to open the specific adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 68.
The following timings must be entered:
- Active Pixels: horizontal resolution
- Active Lines: vertical resolution
- Frequency (Hz): amount of frames per second
Select the calculation method to obtain the correct (standard) video timings.
Possible selections:
- CVT: Coordinated Video Timings
- CVT RB: Coordinated Video Timings Reduced Blanking
- CVT MB: Coordinated Video Timings Minimum Blanking (not a standard)
- GTF: Generalized Timing Formula
Select the Options.
If necessary, scroll down to see extra options.
Select or clear the check boxes.
Image 8-48
EDID file creation, options
86
Image 8-47
EDID file creation
R5905158 HDF SERIES 16/06/2015