Refill Mode; Save Custom Settings - Barco HDF Use And Installation Manual

14. Service
14.6 Refill mode
Before selecting Refill mode, take first all preparations necessary to refill the cooling circuit.
What can be done?
When all necessary preparations are taken, the refill mode activates automatically the refill process.
For more information about the refill process, consult the Service manual.
How to start the refill mode
Press Menu to activate the menus and select Service → Refill Mode.
Image 14-59
Main menu, service
Press ENTER to select. Use the ▲ or ▼ key to select Yes. or No and press ENTER.
Image 14-61
Activate refill process
If you want to start the refill mode, select Yes.
If you do not want to start the refill mode, select No.

14.7 Save Custom Settings

What can be done ?
The current custom settings can be saved to internal backup device in the same way as it would be done when the projector lamp
was switched off.
When settings are changed when the lamp is off, a manual Save custom settings must be executed to save the changes.
When the message Saving data is displayed, never switch off the projector.
How to save
Press Menu to activate the menus and select Service → Save Custom Settings.
270
Image 14-60
Service, refill mode
R5905158 HDF SERIES 16/06/2015