Lens Behavior - Barco HDF Use And Installation Manual

Image 10-55
Main menu, layout
Image 10-57
Layout file services, copy/save as
Press ENTER to select.
The Copy layout file window opens.
If no custom layout files are available, a message that no custom layout files are available is displayed.
Image 10-58
Copy layout
Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically. Arrow key left (◄) has the backspace functionality.

10.6 Lens behavior

What can be done ?
Different custom layouts can have different zoom/focus/shift (lens) settings, e.g. when using the projector on 2 different projector
distances or two different screen sizes (same image but 2 custom layouts needed due to different zoom/focus/shift settings).
Adjust the lens settings for the different situations and save these settings each in a different custom layout.
When using only one screen to project the different layouts, the same lens settings can be used for all custom layouts.
When using different screens, different lens settings can be used (settings saved in the custom file will be used). To use different
lens settings, it is important that the lens is calibrated so that the lens always returns to the saved position when opening a custom
layout.
Switching from a custom file (layout) to a standard file (layout) will not change the current lens settings.
How to set the lens behavior
Press Menu to activate the menus and select Layout → Lens behavior.
R5905158 HDF SERIES 16/06/2015
Image 10-56
Layout, layout file services
10. Layout
143