Replacement Of The Dust Filter On The Top Side - Barco HDF Use And Installation Manual

17. Servicing
Image 17-7
Bottom filter, fixation
Reinstall the side cover of the projector, see "Installation of the side cover", page 279.
C
AUTION
17.4 Replacement of the dust filter on the top side
Necessary parts
New HEPA dust filter for the top side (R9854480).
How to replace the HEPA dust filter on the top side
Remove the side cover of the projector, see "Removal of the side cover", page 276.
Remove the filter (F) on the top side by pulling out the filter holder (H) as illustrated.
Image 17-8
Top filter
Place a new HEPA dust filter in the filter holder.
Caution: Make sure that the airflow indicated on the dust filter match with the airflow of the fans.
Reinstall the filter holder containing the new HEPA filter.
Reinstall the side cover of the projector, see "Installation of the side cover", page 279.
C
AUTION
286
A
:
Never install a used HEPA filter. Always install a new HEPA filter.
:
Never install a used HEPA filter. Always install a new HEPA filter.
A
R5905158 HDF SERIES 16/06/2015
F
H