Installation Of The Lamp House - Barco HDF Use And Installation Manual

17. Servicing
Image 17-10
Unlock lamp house
Clasp the lamp house by the handles and pull the lamp house out of the projector.
Image 17-11
Lamp house removal
While starting up the projector, the electronics detect if a lamp is installed. If no lamp is installed, it is not
possible to start up the projector.

17.7 Installation of the lamp house

W
ARNING
C
AUTION
Due to its high internal pressure, the lamp may explode in either hot or cold states if improperly handled.
288
:
This procedure may only be performed by qualified technical service personnel.
:
Never attempt to disassemble the lamp from its housing or to dispose of it. Return it to Barco.
R5905158 HDF SERIES 16/06/2015