Time And Date - Barco HDF Use And Installation Manual

14. Service
[On] : Dimming is started when an over-temperature is detected.
[Off] : No dimming is started when over-temperature is detected.

14.9 Time and Date

How to set
Press Menu to activate the menus and select Service → Time and Date.
Image 14-67
Main menu, service
Image 14-69
Date and time set up
Use the ▲ or ▼ key to select Hour, Minute, Day, Month or Year and press ENTER to select.
Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
Press ENTER to accept the changes.
Repeat for other values in the same way.
272
Image 14-68
Service, time and date
Image 14-70
Date and time set up
R5905158 HDF SERIES 16/06/2015