Configuring A Switch As A Radius Server; Radius Server Functions Configuration Task List; Configuring A Radius User - HP 3600 v2 Series Security Configuration Manual

NOTE:
Configuring or changing the device ID of a switch will log out all online users of the switch.
•
• HP recommends to save the configuration and reboot the switch after configuring or changing the
device ID.
The device ID is the symbol for stateful failover mode. Do not configure any device ID for a switch
•
working in stand-alone mode.

Configuring a switch as a RADIUS server

RADIUS server functions configuration task list

Task

Configuring a RADIUS user

Specifying a RADIUS client
Configuring a RADIUS user
This task is to create a RADIUS user and configure a set of attributes for the user on a switch that serves
as the RADIUS server. The user attributes include the password, authorization attribute, expiration time,
and user description. After completing this task, the specified RADIUS user can use the username and
password for RADIUS authentication on the switch.
Follow these steps to configure a RADIUS user:
To do...
Enter system view
Create a RADIUS user and enter
RADIUS server user view
Configure a password for the
RADIUS user
Configure the authorization
attribute for the RADIUS user
Set the expiration time for the
RADIUS user
Configure a description for the
RADIUS user
Use the command...
system-view
radius-server user user-name
password [ cipher | simple ] password
authorization-attribute { acl acl-number |
vlan vlan-id } *
expiration-date time
description text
47
Remarks
Required
Required
Remarks
—
Required
No RADIUS user exists by
default.
Optional
By default, no password is
specified.
Optional
Not configured by default.
Optional
By default, no expiration
time is set, and the system
does not check users'
expiration time.
Optional
Not configured by default.