Control Unit; Control Panel; Footrest Removed - Otto Bock Skippi Instructions For Use Manual

Fig. 29

Footrest removed

6.3

Control unit

NOTICE
Interference from electromagnetic fields. The power
wheelchair has been tested according to EMC regulati-
ons. The following particularities must be observed during
operation:
The driving characteristics of the power wheelchair may
be affected by electromagnetic fields (mobile phones or
other radiating devices). Switch all mobile devices off while
driving.
Skippi
The power wheelchair may generate electromagnetic
fields that can cause interference with other devices. Turn
the control unit off when it is not needed.
Notwithstanding compliance with all applicable EMC di-
rectives and standards, the power wheelchair can be af-
fected by interference from other electric devices (e.g.,
department store EAS systems) or cause interference with
such devices. If you notice such behaviour, move your po-
wer wheelchair outside the interference range.

6.3.1 Control Panel

The power wheelchair is operated using the control panel.
The control panel consists of a keypad, LCD display and
joystick. The charging/programming receptacle and two in-
puts for external push-buttons are located on the underside.
The power wheelchair is turned on and off using the keypad;
driving commands can be entered and the status of certain
functions and components can be displayed.
Operation
Ottobock 135
|