Otto Bock Skippi Instructions For Use Manual page 151

7.1.1 Functional overview
The attendant control can be used to operate the driving
function and the electric seat functions.
The module can be connected to the control unit in combi-
nation with the hand control device or separately.
Fig. 36 Attendant control overview
1 On / Off button
2 Battery LED
3 Mode button
4 Mode LED
Skippi
5 Display of the selected electric
seat function
6 Joystick
On/Off button (item 1)
The button is used to turn the power wheelchair on, to acti-
vate the drive-away lock (also see chapter 6.3.6), and to
turn the wheelchair off.
The control panel displays the following after the attendant
control is turned on:
Display symbol
Tab. 5 "Attendant control activated" display
Battery LED (item 2)
The battery LED lights up when the unit is on. Colour and
flash codes provide information on the current battery ca-
pacity status:
LED
Green is lit
Orange is lit
Red is lit
Accessories
Information
Attendant control activated
Status
Battery capacity > 70%
Battery capacity 30% - 70%
Battery capacity < 30%
Ottobock 151
|