Otto Bock Skippi Instructions For Use Manual page 163

8.1 Warning
A warning indicates a status or malfunction of one or several
components of the power wheelchair. The function of com-
ponents that have no errors is not restricted. For example, if
the connection between the controller and seat motor mal-
functions, this error will only be indicated if the user attempts
to activate the motor. However, the driving function is still
available.
8.2 Fault
CAUTION
Risk of injury if the power wheelchair stops abruptly. In
case of communication problems in the control unit bus
system, the system triggers an emergency stop in order to
prevent any uncontrolled functions. Depending on the
source of the malfunction, it may be possible to drive the
wheelchair out of a danger zone such as road traffic after
switching the control unit on again.
If the driving function is still not available after switching
the control unit on again, the wheel lock can be deactivat-
ed (see Section 6.4) to switch over to pushing mode. Con-
tact a specialist dealer immediately after an emergency
stop!
Skippi
CAUTION
Risk of accidents due to uncontrolled driving behaviour.
Uncontrolled movements can occur during operation of the
power wheelchair as a result of malfunctions. Please con-
tact your authorised specialist dealer immediately if this
occurs.
A fault impairs one or several functions of the power wheel-
chair. The system is not fully operational until the fault has
been corrected.
Malfunctions / troubleshooting
Ottobock 163
|