Otto Bock Skippi Instructions For Use Manual page 172

Maintenance and Care
Fig. 46 Removing the caster wheel
1 Axle screw
9.4 Cleaning and Care
NOTICE
Risk of damage to electronics due to water penetration.
In order to avoid malfunctions, the electronic components,
motors and batteries must not come into contact with wa-
ter when cleaning the power wheelchair.
NOTICE
Risk of damage to power wheelchair components. Do not
use any harsh cleaning agents, solvents or hard brushes to
172 | Ottobock
clean the power wheelchair. Never use a water jet or high-
pressure cleaning apparatus to clean the power wheelchair.
INFORMATION
Prior to disinfection, clean the seat and back upholstery as
1
well as the seat cushion, control panel, and armrest.
The power wheelchair must be cleaned regularly, depend-
ing on the amount of use and the degree of soiling.
The control panel, battery charger, armrest and trim compo-
nents can be cleaned with a damp cloth and mild cleaning
solution.
Use a dry brush to clean the seat and back upholstery and
the seat cushion.
Use a damp plastic brush to clean the wheels and frame.
Skippi