Otto Bock Skippi Instructions For Use Manual page 112

Safety
INFORMATION
The control unit of the power wheelchair must be turned on
again after every emergency stop. In the event of communi-
cation problems in the control unit bus system, the system
triggers an emergency stop in order to prevent any uncon-
trolled functions.
If the driving function is still not available after turning the
control unit on again, switch over to pushing mode by re-
leasing the wheel lock. An authorised specialist dealer will
then be required to look at the wheelchair.
INFORMATION
The control unit of the power wheelchair switches to a safe
mode at elevated temperatures and after driving uphill for
extended periods of time, limiting the performance of the
power wheelchair. However, the user/attendant is able to
drive the power wheelchair out of a hazardous situation at
any time. The power wheelchair is fully functional again
once the unit has cooled down sufficiently (this may take
several minutes depending on the ambient temperature).
112 | Ottobock Skippi