Detaching And Refitting The Fuser Heater - Olivetti d-Copia 5200MF Service Manual

(4) Detaching and refitting the fuser heater

Follow the procedure below to replace the fuser heater.
Procedure
1. Remove the fuser unit (see page 1-5-30).
2. Remove the upper fuser cover (see page 1-
5-31).
3. Remove two screws and the connector.
4. Pull out the fuser heater from the fuser unit.
5. Replace the fuser heater and install the
heater to fuser unit.
6. Refit the upper fuser cover.
7. Refit the fuser unit.
Y111960-2
Connector
Service Manual
Screw
Figure 1-5-66
Fuser heater
Figure 1-5-67
2KR/2KS
Screw
1-5-33