Detaching And Refitting The Fuser Heater - Olivetti d-Copia 2500MF Service Manual

(4) Detaching and refitting the fuser heater

Follow the procedure below to replace the fuser heater.
Procedure
1. Remove the fuser unit (see page 1-5-40).
2. Remove four claws and remove the fuser
unit cover.
3. Remove two connectors.
4. Remove four screws.
5. Separate the right fuser frame and left fuser
frame.
Y108620-5
Connector
Claw
Connector
Claw
Right fuser frame
Screw
Screw
Service Manual
Claw
Claw
Fuser unit cover
Figure 1-5-82
Screw
Screw
Left fuser frame
Figure 1-5-83
2H0/2HZ
1-5-45